Replacing a broken laptop screen
By Tom Nonmacher
Anyone who has ever experienced a broken laptop screen knows the frustration it can bring. The inconvenience of being unable to use your laptop for work, school, or leisure can be quite daunting. However, before you rush to buy a new laptop, consider replacing the screen. This can be cost-effective and more environmentally friendly than buying a new device. This blog post will guide you through the process of replacing a broken laptop screen.
Firstly, you'll need to identify the model of your laptop. This is usually located on the bottom of your laptop or in your laptop's system settings. Having this information is crucial as it will help you in purchasing the correct replacement screen. You can find replacement screens from online retailers, computer repair shops, or directly from the manufacturer.
Once you've obtained the right screen, you will need a Phillips screwdriver, ideally a small set as laptop screws tend to be small. Before you start the replacement process, ensure that your laptop is turned off, unplugged, and that the battery has been removed if possible. This is to avoid any potential electrical damages that might occur.
The next step is to remove the bezel or the plastic frame surrounding the screen. This is usually held in place by small screws, which are sometimes hidden under small plastic or rubber covers. Use your screwdriver to remove these screws and gently pry the bezel away from the screen. Be careful not to apply too much force as the plastic can be fragile.
Once the bezel is removed, you should see the damaged screen held in place by metal brackets. There will be more screws to remove here. Once removed, gently pull the screen away from the back cover. You'll notice a cable connected to the back of the screen - this is the video cable. Disconnect this cable carefully to fully remove the old screen.
Installation of the new screen is essentially the reverse process. Connect the video cable to the new screen, position it in the metal brackets, and replace the screws. Once the screen is securely in place, replace the bezel and any screws you removed earlier. Once everything is back in place, reconnect the battery, turn your laptop on, and check to see if the new screen is working properly.
While replacing a laptop screen may seem intimidating, with a little patience and careful handling, it's a task that's certainly achievable. Always remember to work slowly and keep track of your screws and components. If you feel uncertain at any point, don't hesitate to seek help from a professional. Remember, it's always better to be safe than sorry.